Penofin Ultra Premium Red Label Western Red Cedar 1 Gallon (3.78L)

$92.99

Protect the Beauty of Wood in Marine Environments Pure and Natural

See the Best Stain in 2022!

Penofin Ultra Premium Red Label was created to meet the demand for an exterior wood finish that outperforms all other transparent stains. The Highly penetrating Brazilian Rosewood Oil base, from sustainably harvested seeds, protects and nourishes wood fibers far deeper than any other stain. With the added mildew protection, the “dark menace” will not attack wood so easily and helps preserve that freshly milled look. Ultra Premium is formulated to provide 99% UV protection. Penofin Red Label is perfect where rain, wind, snow, or high elevations are encountered. The formula in Red Label is the result of extensive testing, and the use of the highest quality ingredients. Ultra Premium Red Label gives longer life to wood of any species.

  • Increased transoxide pigments for 99% ultraviolet protection against fading
  • Extra protection against mildew/Added high grade mildewcide
  • Brazilian Rosewood Oil that deeply penetrates to protect against moisture
  • Pigments won't fade, turn chalky or wash off ~ One-coat application-no sanding or stripping
  • Dry to touch in 4 hours
  • Serviceable in 12 hours
  • Fully cured in 4-7 days
Application

Stir this product thoroughly before and during application. Apply at temperatures above 45° . Penofin is stable under freeze/ thaw conditions. For optimum performance bring the stain to room temperature before application. Do not apply if the wood is hot to the touch. Using a brush, stain pad, or plastic pump sprayer apply a liberal coat to the wood. Protect, tarp or mask off any adjacent areas you do not wish to stain. Penofin is a penetrating finish and will penetrate any porous surface. Allow Penofin 20 -30 minutes to penetrate into the wood. This step is important as it allows the finish to coat the individual fibers of the wood, protecting your investment from the inside out.

After 20-30 minutes wipe the surface thoroughly with clean lint free cloths to remove any excess finish.

If using the 2 coat (550 VOC) formula, wait a minimum of 3 hours before applying a second light coat of Penofin. Again after 20-30 minutes wipe the surface thoroughly to remove any excess finish.

Penofin is a penetrating finish and is not a surface coating. Failure to wipe will allow the finish to dry on the surface of the wood and will result in a tacky finish.

Soak any wiping cloths in a bucket of water to avoid the possibility of spontaneous combustion which can occur with any oil-based product.

    🚚
    Free Canada Wide Shipping On Orders Over $149
    +