Ramuc DS Acrylic Pool Paint Matte Finish 3.79L


DS offers advantages over traditional solvent-based paints. DS Acrylic can be applied to damp surfaces and previously painted chlorinated and synthetic rubber surfaces. Use of DS allows the pool to be filled within 3 days after the final application of paint. Acrylic coatings such as DS are used when short down times are critical. Water-based acrylics are extremely color-fast and UV resistant.

Compatibility: For compatibility purposes, the existing paint on previously painted surfaces of a pool should be determined before painting. Use dark colors for accent painting only. Dark colors can prematurely fade or blister, especially in chemically treated water.

Ramuc DS Acrylic Pool Paint Product Brochure


⭐ Excellent solution when short down-time is critical.
⭐ Self-priming.
⭐ Two-coat system.
⭐ Adheres best on a cool, damp (not wet), and extremely clean surface.
⭐ VOC compliant everywhere in US and Canada.

Surface Types:

  • Existing Acrylic
  • Existing Chlorinated and Synthetic Rubber
  • Existing Epoxy
  • Bare Concrete
Prep Agent: Do Not Apply To: (Non-compatible surfaces or coatings)
  • Fiberglass
  • Gelcoat
  • Spas/Hot Tubs
  • Metal
  • Salt Water Pool Systems
  • 250 sq. ft./per gallon on bare surfaces
  • 350-400 sq. ft./per gallon on recoats

Dry Time Between Coats:

  • 4 Hours

Dry/Cure Time Before Filling: 

  • Outdoor: 3 Dry Days
  • Indoor: 6 Days

Technical Specs:

Application: Roller/Brush/Spray.
Mixing: Mechanically mix.
Coverage: Up to 400 sq. ft./gallon on recoats.
Fill Time-Outdoor: 3 dry days.
Clean-up: Soap and Water. 

Matte finish.
Not for use on fiberglass/gelcoat pools and spas.
Do not store product at temperatures less than 32 degrees F.

How Can I Determine What Type of Paint Is on My Pool?

The type of existing paint can be determined by wiping the surface with various solvents. The solvents will start to dissolve the paint film causing it to soften and become sticky. The solvent that affects the paint film determines what type of paint is present. To perform the tests first clean the immediate surface area(s) to be sure that there are no contaminants or chalk present. Rinse the area with clean water and allow it too thoroughly dry. Next, saturate a clean cotton ball with the solvent #1, and then gently wipe it back and forth in a linear pattern approximately 6 inches in length. The paint should start to lose gloss and then become soft/sticky after 4 or 5 passes. If not, use solvent #2 and another cotton ball to apply that solvent in an adjacent area. If there is no reaction use solvent #3 in yet another area. Tests should be conducted in at least 3 to 4 areas within the pool. It is extremely important that you wear rubber gloves to protect your skin from the solvents. Indicator solvents are as follows:

Solvent #1) Denatured Alcohol – softens waterborne acrylic pool paint

Solvent #2) Xylene – softens both chlorinated rubber and synthetic rubber-based pool paints

Solvent #3) MEK – softens solvent based epoxy pool paint

Free Canada Wide Shipping On Orders Over $149