INSL-X Epoxy Swimming Pool Paint

En existencia
SKU: IG4020S9F-2K UPC: 090548230014
Precio regular $279.75 CAD
Get free shipping on hundreds of items!
35 day returns.
US customers taxes due upon delivery.

Found a lower price elsewhere? We'll match it plus give you an extra 5% off the difference. Get the best deal guaranteed*

INSL-X Epoxy Pool Paint! Better than your Average Pool Paint. Get Years of Enjoyment with Durable Protection Against Chemicals and UV Rays.

INSL-X Epoxy Pool Paint is a premium epoxy formula that clings to surfaces and resists fading, blistering, and peeling longer than standard pool paints. Get ready to dive into a pool that dazzles with a smooth, glossy new finish.

INSL-X Epoxy Swimming Pool Paint Features:

Two-component polyamide kit. Gallon A and B must be mixed together.

Epoxy formula provides superior adhesion and chemical resistance

Semi-Gloss finish enhances the look of your pool

Specifically made for pool surfaces like concrete, gunite, fibreglass, and steel surfaces.

Easy to apply with a brush, roller, or sprayer

Suitable for both indoor and outdoor pools

Have Questions? Check our FAQ section or contact us for more information about INSL-X Epoxy Swimming Pool Paint.

Why Choose INSL-X Epoxy Swimming Pool Paint?

Two-Component Epoxy Coating: Foolproof formula providing a robust shield for your pool

Superb Durability: Built to endure both fresh and saltwater environments

Resistance Against Pool Chemicals: No more degradation from chlorine or other common pool chemicals

Longevity: Formulated for a lasting finish to keep your pool looking great

Wondering where to buy INSL-X Epoxy Swimming Pool Paint ? Look no further. We guarantee a genuine INSL-X product, ensuring you only get the best!

INSL-X Epoxy Swimming Pool Paint  Spec Chart:

Title Specs

Installation Temperature:

10° C (50° F) min /
37.7° C (100° F) max

Number of Coats Required:


Recoat Time:

3-72 hours

Full Cure:

Outdoor Pool: 7 days before filling.

Indoor Pool: 14 days before filling.

Coverage per 3.79L:

350 – 400 sq. ft./gal.


<340 g/L

Vehicle Type:

Polyamide Epoxy

Dry Film Thickness/Coat:

2.5 - 2.9 mils dry (4.0 - 4.6 mils wet)


11.5 lbs/gal



Solids (% by Volume):

62 ± 1%

Colors Available:

White, Black, Royal Blue, Ocean Blue



INSL-X Epoxy Swimming Pool Paint Application Guide:


INSL-X Epoxy Pool Coating is a two-component, polyamide epoxy coating especially designed for properly prepared concrete, Marcite, Gunite, fibreglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. Epoxy Pool Paint can be applied directly to a variety of substrates, including properly prepared epoxy coatings.

This is a two-component product with a mix ratio of 1:1. It requires 1 part of the proper “A” or Base Component mixed with 1 part of the proper “B” or Converter Component. Do Not Mix Partial Kits.

Surface Preparation:

The following is a basic guide only. If a previous paint exists and is in good condition, determine the type of pool paint previously used. Epoxy Pool Coating can only be applied over another paint if the previous paint was also a 2-part epoxy. Surfaces to be painted must be clean, dry and free from all oils and grease.
Use a heavy duty citrus based cleaner / degreaser. Hand scrub at the water line where oils from sun tan lotion will tend to migrate.

  • Unpainted Concrete: Following a thorough cleaning, new or previously unpainted concrete pools must be etched with a 10% solution of muriatic acid, evenly applied until it ceases to effloresce. Then thoroughly triple rinse with clean water and allow to dry 3 days. It is extremely important to ensure that all traces of acid are thoroughly neutralized and rinsed away. Use a Solution of 1lb. Baking Soda to 5 3.79 Ls Water.
  • (Marcite/Gunite/Diamond Brite): Following a thorough cleaning, new or previously unpainted plaster must be etched with a 10% solution of muriatic acid, evenly applied until it ceases to effloresce. Then thoroughly triple rinse with clean water and allow to dry 3 days.
  • Unpainted Fibreglass: Following a thorough cleaning, new or previously unpainted fibreglass should be scuff sanded with 150 – 180 grit sandpaper or equivalent. Rinse off sanding dust and allow to dry 24 hours.
  • Unpainted Steel: Following a thorough cleaning, inspect for rust. Remove rust following Hand Tool Cleaning (SSPC-SP 2) or Power Tool cleaning (SSPC-SP 3). Prime with Corotech® Polyamide Epoxy Primer V150.
  • Previously Painted Pools: Scrub surface with a Pool Cleaner to get rid of all chalk, scum, oil, dirt and suntan lotions. Flush with plenty of clean water and let dry. Scuff sand with 150 – 180 grit sandpaper or equivalent. Rinse off sanding dust and allow to dry 24 hours


Mix each individual component thoroughly prior to inter-mixing the two. ”A” and “B” must be combined together (1:1 ratio) and thoroughly mixed. A drill mixer at low speed should be used to accomplish this task. Then allow the mixture to induct (refer to page 1). This induction time is critical and should be the same for all kits.

Do not mix partial containers. Do not mix more material than can be used in 3-6 hours. Do not scrape the sides of the final container when using the last of the catalyzed product as this may introduce partially uncatalyzed product to be applied.

This product is formulated to be applied without thinning. Do not thin if this would result in the product exceeding any VOC regulations in effect where it is being applied. POOL PAINT MUST BE APPLIED IN MULTIPLE THIN COATS. DO NOT APPLY HEAVILY. TWO COATS ARE REQUIRED.

This product can be applied by Brush, Roller or Spray. Roller application is
preferred. Follow spread rate recommendations. Do not apply heavier than
recommendations. Always apply two coats of pool paint. If sprayed, back-rolling is required.


If more than 72 hours (25 °C [77 °F]) elapses between coats, sand the film to provide sufficient profile (150-180 grit). Do not apply this product if the material, substrate or ambient temperature is below 10 °C (50 °F) or above 37.7 °C (100 °F). Do not paint if surface temperature is within 5 degrees of the dew point. Wherever possible, avoid painting in direct sunlight.

Frequently Asked Questions:
INSL-X Epoxy Swimming Pool Paint

Q1. Is INSL-X Epoxy Pool Paint suitable for all types of pools?

A1. Yes, INSL-X Epoxy Pool Paint is designed for use on properly prepared concrete, Ginite, Marcite, fibreglass and steel pools.

Q2. How long does the epoxy pool paint last?

A2. INSL-X Epoxy Pool Paint provides a long-lasting finish. You can expect the pool paint to last anywhere from 3 to 5 years.

Q3. Can I apply INSL-X Epoxy Pool Paint myself or do I need a professional?

A3. You can easily apply this paint yourself using a brush, roller, or sprayer, making it convenient for DIY projects.

Q4. How should I prepare my pool surface before applying INSL-X Epoxy Pool Paint?

A4. Ensure the pool surface is clean, dry, and free of contaminants for optimal adhesion and longevity of the paint.

Q5. Is this paint safe for use in pools with chlorine or saltwater systems?

A5. Yes, INSL-X Epoxy Swimming Pool Paint is formulated to withstand chemicals commonly used in pools, including chlorine and saltwater systems.

See Why Our Customers Love
INSL-X Epoxy Swimming Pool Paint

Customer Reviews

Based on 2 reviews
Annie Levesque (Thetford-Mines, CA)

Excellent service!!!

Amanda Wright (Toronto, CA)

Great to deal with