Overview:
U.V. Plus for Hardwood Decks an oil based penetrating wood finish formulated for exotic hardwoods such as ipe and mahogany. U.V. Plus for Hardwood Decks protects exterior woodfrommoisture and U.V. light while maintaining a natural appearance.
Special Instructions:
Before applying, this product should be mixed thoroughly. Ensure that all settled material on bottom of can is evenly incorporated, and intermix all containers (box them).
Apply UV Plus for Hardwood Decks when surface temperaturesare between 45F and 90F. If surface is hot to the touch, it is too hot to apply product. Do not apply product if precipitation is expectedwithin 24-48 hours.
Spray Application: Spraying is not recommended for decks. On vertical applications, back brush or roll to prevent over application, sags and runs. Cover surrounding areas to protect from overspray. For airless spray, use .015” to .019” tip size for best results.
Brush Application: To minimize lapping, maintain a wet edge length wise and do not break in the middle of boards.
Surface Preparation:
Always clean gray or dirty wood before applying UVPlus. Use Messmer’s WD Wood & Deck Cleaner (A) and Brightener (B) available in powder concentrates. Allow wood to completely dry for at least 24 to 48 hours. Previously stained or treated wood should be sufficiently weathered and cleaned to allow for complete penetration. New wood should be aged at least 6-8 weeks and cleaned before applying product.
Cleanup:
Use paint thinner. Dispose of waste in accordance with local, state and federal regulations.
