Meet ZINSSER® READY PATCH™ PROFESSIONAL SPACKLING & PATCHING COMPOUND
Your new go-to solution for achieving flawless finishes on various surfaces. Whether you're tackling nail holes on drywall or repairing weathered wood, Ready Patch combines the best of spackling paste and plaster to give you professional-grade results every time.
Key Features and Benefits
Workability Meets Strength
Ready Patch offers the perfect blend of workability and strength. Its smooth consistency makes it easy to apply and sand, while its plaster-like hardness ensures long-lasting durability once cured. Say goodbye to crumbling repairs and hello to enduring quality.
Versatile Application
From wood to metal, drywall to masonry, Ready Patch adheres seamlessly to a wide range of surfaces. It even sticks to glossy surfaces like metal and tile, as long as they're clean and free of contaminants. This makes it an invaluable tool for any repair job, big or small.
Smooth and Easy Application
Ready Patch's smooth texture allows for effortless application. Whether you're filling tiny nail holes or large gouges, you can achieve a flush, seamless finish with just a few swipes of a putty knife.
Surface Preparation Instructions
Before you start, ensure that all surfaces are clean, dry, and in sound condition. Here's how:
- Clean: Wash the area thoroughly with detergent and water to remove dust, dirt, grime, and other contaminants.
- Dry: Rinse well and allow the surface to dry completely.
- Remove Old Coatings: Sand and/or scrape away any poorly adhering existing coatings.
- Replace Loose Caulk: Remove any loose, dried caulk and replace it where necessary.
Application Instructions
Achieving a perfect repair is easy with Ready Patch. Follow these steps:
Ideal Conditions: Apply when air and surface temperatures are between 50-90°F (10-32°C) and relative humidity is below 95%. Higher temperatures and lower humidity will speed up the drying process, while lower temperatures and higher humidity will slow it down.
Tools: Use a clean putty or spackling knife. A 1” knife is ideal for nail holes and cracks, while a 2” knife works best for larger gouges.
Application:
- Spread Ready Patch over the hole or imperfection.
- Remove excess product until smooth and flush with the surface.
- Apply as many coats as necessary to fill the area level with the surrounding surface. For holes wider and deeper than ¼”, two or more applications are recommended.
Drying and Finishing
Drying Time:
- Ready Patch Lite can be primed or painted when dry to the touch.
- For best results, wait until the product has fully dried before sanding smooth.
Finishing:
- Sand the patched areas until smooth.
- Prime the patched areas before painting to prevent excessive absorption of paint.
Frequently Asked Questions (FAQ)
1. Can I use Ready Patch on exterior surfaces?
Yes, Ready Patch is suitable for both interior and exterior applications, making it versatile for various repair needs.
2. How long does it take for Ready Patch to dry completely?
The drying time can vary depending on environmental conditions. For best results, wait until the product is fully dry before sanding and painting.
3. Can Ready Patch be used on glossy surfaces?
Yes, Ready Patch adheres well to glossy surfaces such as metal and tile, provided they are clean and free of contaminants or poorly adhered existing finishes.
4. Do I need to prime the patched area before painting?
Yes, priming the patched area before painting is recommended to prevent excessive absorption of paint and ensure a uniform finish.
5. How many coats of Ready Patch should I apply for deep holes?
For holes wider and deeper than ¼”, two or more applications of Ready Patch are recommended to achieve a level finish with the surrounding surface.