Flame Control 25-Minute Thermal Barrier for Spray Polyurethane Foam Insulation, 60-60A
Couldn't load pickup availability
Fire Proof Your Insulation with Flame Control 25-Minute Thermal Barrier for Spray Foam Polyurethane Insulation
Flame Control 60-60A is a 25-Minute Thermal Barrier for Spray Polyurethane Foam Insulation. A water-based, low VOC, intumescent latex paint, 60-60A has been tested to NFPA 286 test standards and has been approved for use on spray foam insulation. Flame Control 60-60A is suitable for use in inhabited (occupied) spaces where spray foam insulation must be coated with a thermal barrier per the IBC.
60-60A should be applied in a single coat, and does not require a primer. These features make 60-60A the easiest to use, fastest to apply thermal barrier available on the market.
Performance Information:
⭐ Provides a ULC and NFPA test method qualifying thermal barrier on spray polyurethane foam installations - See Fire Hazard Classification Section.
⭐ Dries by water evaporation to a tough, hard, velvety flat finish.
⭐ Does not leach (lose fire retardancy) on exposure to high humidity.
⭐ Meets all present VOC and environmental/ecological regulations
Recommended Uses:
For application to spray polyurethane foam surfaces in occupied spaces where spray foam insulation must be separated from the interior of the building per IBC Section 2603.4 approval, and on exterior surfaces when protected as above.
Product Characteristics
| Product Name | Flame Control No. 60-60A |
|---|---|
| Type | Water-based Intumescent Fire Retardant Paint |
| Finish | Flat |
| Color | Off-White (tintable – mix thoroughly for uniform color) |
| Thermal Barrier Rating | 15-minute thermal barrier on spray polyurethane foam (NFPA 286) |
| Coverage | 80 sq ft / gal (1.95 m²/L) @ 20 mils wet / 10 mils dry |
| Volume Solids | 51 % ± 2 % |
| Weight Solids | 65 % ± 2 % |
| VOC Content | < 40 g/L (Low VOC) |
| Dry Time @ 77 °F / 50 % RH | To Touch: 1–2 hours | Recoat: 2–4 hours |
| Cure Type | Water evaporation |
| Flash Point | None |
| Reducer / Cleaner | Water |
| Shelf Life | 12 months (unopened) |
| Packaging | 1 gal & 5 gal containers (approx. 12 lb/gal) |
| Application Method | Airless spray recommended; brush or roller possible |
| Recommended Equipment | Graco Mark 4 or 5 (1.35 GPM, 3300 PSI, tip 517–533); 3/8 in hose for first 50 ft, ¼ in x 6 ft whip; remove filters. |
| Surface Prep | Foam must be clean, dry, firm, and free of dust, oil, wax, or mildew. |
| Application Temperature | 10 °C – 30 °C (50 °F – 86 °F) |
| Storage Temperature | Store above 10 °C (50 °F); protect from freezing. |
| Humidity Conditions | Use fans if RH > 65 %; high humidity may extend dry time. |
| Fire Test Compliance | NFPA 286; IBC Section 803; IRC 316.6; NFPA 101 Life Safety Code |
- Found a lower price elsewhere? We'll match it plus give you an extra 5% off the difference. Get the best deal guaranteed*
Canada Shipping
- Enjoy free shipping to Ontario and Quebec on orders over $149.
- Orders over $249 qualify for free shipping to all other provinces.
US Shipping
- Free shipping is available to select US states.
- Please note, US customers are responsible for any taxes upon delivery.
- Returns accepted within 35 days from the date of delivery.
- Custom tinted paints are classified as Final Sale items and are not eligible for return or store credit.