INSL-X Waterborne Swimming Pool Paint - WR Semi-Gloss 3.79L

$109.99

A new generation of waterborne, acrylic emulsion pool paints which can be applied over most types of pool coatings in good condition, as well as bare concrete or plaster surfaces. WR-1000 Series pool paint can be applied to slightly damp surfaces, dries quickly for recoating, and withstands continuous submersion in fresh and salt water.

Recommended For: Pools, Fountains. Waterborne Pool Paint is designed for use on concrete, Marcite, and Gunite surfaces. The integrity of the Marcite or Gunite must be sound and solid. Do not use in hot tubs and spas due to high water temperatures. We do not recommend painting stainless steel, aluminum, galvanized, fibreglass, steel or vinyl lined pools with this product. WR-1XXX Series is compatible over any type or previously applied pool paint.

Coverage: 300-400 sq. ft/3.79L

Colours — Standard: WR1010 White, WR1020 Black, WR1019 Aquamarine, WR1023 Ocean Blue, WR1024 Royal Blue

Features
  • Waterborne Pool Paint
  • Use With Fresh Or Salt Water
  • Dries Quickly
  • Lasting Colour
  • Semi-Gloss Sheen 
  • Soap & Water Cleanup
  • Resin Type Acrylic
  • Interior & Exterior
Colour Card & Supporting Documents
How Can I Determine What Type of Paint Is on My Pool?

The type of existing paint can be determined by wiping the surface with various solvents. The solvents will start to dissolve the paint film causing it to soften and become sticky. The solvent that affects the paint film determines what type of paint is present. To perform the tests first clean the immediate surface area(s) to be sure that there are no contaminants or chalk present. Rinse the area with clean water and allow it too thoroughly dry. Next, saturate a clean cotton ball with the solvent #1, and then gently wipe it back and forth in a linear pattern approximately 6 inches in length. The paint should start to lose gloss and then become soft/sticky after 4 or 5 passes. If not, use solvent #2 and another cotton ball to apply that solvent in an adjacent area. If there is no reaction use solvent #3 in yet another area. Tests should be conducted in at least 3 to 4 areas within the pool. It is extremely important that you wear rubber gloves to protect your skin from the solvents. Indicator solvents are as follows:

Solvent #1) Denatured Alcohol – softens waterborne acrylic pool paint

Solvent #2) Xylene – softens both chlorinated rubber and synthetic rubber-based pool paints

Solvent #3) MEK – softens solvent based epoxy pool paint

🚚
Free Canada Wide Shipping On Orders Over $149
+

A new generation of waterborne, acrylic emulsion pool paints which can be applied over most types of pool coatings in good condition, as well as bare concrete or plaster surfaces. WR-1000 Series pool paint can be applied to slightly damp surfaces, dries quickly for recoating, and withstands continuous submersion in fresh and salt water.

Recommended For: Pools, Fountains. Waterborne Pool Paint is designed for use on concrete, Marcite, and Gunite surfaces. The integrity of the Marcite or Gunite must be sound and solid. Do not use in hot tubs and spas due to high water temperatures. We do not recommend painting stainless steel, aluminum, galvanized, fibreglass, steel or vinyl lined pools with this product. WR-1XXX Series is compatible over any type or previously applied pool paint.

Coverage: 300-400 sq. ft/3.79L

Colours — Standard: WR1010 White, WR1020 Black, WR1019 Aquamarine, WR1023 Ocean Blue, WR1024 Royal Blue

Features
  • Waterborne Pool Paint
  • Use With Fresh Or Salt Water
  • Dries Quickly
  • Lasting Colour
  • Semi-Gloss Sheen 
  • Soap & Water Cleanup
  • Resin Type Acrylic
  • Interior & Exterior
Colour Card & Supporting Documents
How Can I Determine What Type of Paint Is on My Pool?

The type of existing paint can be determined by wiping the surface with various solvents. The solvents will start to dissolve the paint film causing it to soften and become sticky. The solvent that affects the paint film determines what type of paint is present. To perform the tests first clean the immediate surface area(s) to be sure that there are no contaminants or chalk present. Rinse the area with clean water and allow it too thoroughly dry. Next, saturate a clean cotton ball with the solvent #1, and then gently wipe it back and forth in a linear pattern approximately 6 inches in length. The paint should start to lose gloss and then become soft/sticky after 4 or 5 passes. If not, use solvent #2 and another cotton ball to apply that solvent in an adjacent area. If there is no reaction use solvent #3 in yet another area. Tests should be conducted in at least 3 to 4 areas within the pool. It is extremely important that you wear rubber gloves to protect your skin from the solvents. Indicator solvents are as follows:

Solvent #1) Denatured Alcohol – softens waterborne acrylic pool paint

Solvent #2) Xylene – softens both chlorinated rubber and synthetic rubber-based pool paints

Solvent #3) MEK – softens solvent based epoxy pool paint