Overview:
Messmers UV Plus U.V. Plus is an oil based penetrating wood finish suitable for decks, log homes, woodsiding, fencing and other exterior wood surfaces. U.V. Plus protects wood while maintaining a naturalappearance.
Surface Preparation:
Always clean gray or dirty wood before applying UV Plus. Use Messmer’s WD Wood & Deck Cleaner (A) and Brightener (B) available in powder concentrates. Allow wood to completely dry for at least 24 to 48 hours. Previously stained or treated wood should be sufficiently weathered to allow for complete penetration. New redwood should be aged at least 6-8 weeks and cleaned and brightened before applying product.
Special Instructions:
- Before applying, this product should be mixed thoroughly.Ensure that all settled material on bottom of can is evenlyincorporated, and intermix all containers (box them).
- Apply UV Plus when surface temperatures are between 45F and90F. If surface is hot to the touch, it is too hot to apply product. Donot apply product if precipitation is expected within 24-48 hours.
-
Spray Application: When spraying, back brush or roll toprevent sags and runs. Cover surrounding areas to protectfrom overspray. For airless spray, use .015” to .019” tip sizefor best results.
-
Brush Application: To minimize lapping, maintain a wetedge lengthwise and do not break in the middle of boards.One coat is sufficient for most applications. Product notabsorbed into the wood within 30-60 m
Clean Up:
Use paint thinner. Dispose of waste in accordance withlocal, state and federal regulations.
Danger - Rags, steel wool or waste soaked with UV Plus mayspontaneously catch fire if improperly discarded. Immediatelyafter each use, place rags, steel wool or waste in a sealed, waterfilled metal container.
