Shop primers from Benjamin Moore, INSL-X, Zinsser, KILZ, XIM and Envirolak for new drywall, stains, glossy surfaces, bare wood, metal and masonry. Pick by the job below, then topcoat with your paint. We tint Benjamin Moore paint to any of their colours and match colours from other brands too.

Which primer is right for you?

Your project or need	Best choice	Why
New drywall and plaster	Benjamin Moore Drywall Primer K265	Interior acrylic primer that seals new drywall, hides well and dries in 30 minutes. Recoat in 2 hours
Big colour changes, inside or out	Fresh Start High-Hiding All Purpose	100% acrylic, interior and exterior, high hide, dries in 30 minutes
Glossy or slick surfaces: tile, laminate, PVC, vinyl, cabinets	INSL-X Stix or XIM UMA	Waterborne bonding primers made for hard-to-coat surfaces, including glass and fiberglass
Water, smoke or crayon stains, and wallpaper prep	INSL-X Aqua Lock Plus	100% acrylic, blocks common stains, recoat in 1 hour, can go under wallcoverings
Severe stains and odours indoors	KILZ Restoration or Zinsser B-I-N	Block heavy water, smoke and nicotine stains and seal odours. KILZ is water-based, B-I-N is shellac-based
Stains indoors when oil-based performance is needed with less odour	Zinsser Odorless Oil-Based	Interior-only oil primer for water, smoke, tannin, nicotine and fire stains
Bare wood and cedar or redwood tannin bleed	INSL-X Prime Lock Plus	Alkyd primer that doesn't raise the grain and takes latex or oil topcoats
Exterior wood, hardboard and metal	Zinsser Cover-Stain	Oil-based, interior and exterior, recoat in 1 hour
All-purpose primer for wood, drywall, masonry and metal	Zinsser Bulls Eye 1-2-3	Water-based, bonds to glossy surfaces without sanding, topcoat in 1 hour
Stucco, brick, T1-11 siding and rough surfaces	XIM Peel Bond	High-build, flexible primer that bridges hairline cracks
Cabinets, furniture and millwork	Envirolak T9000	One-part water-based primer for stain and tannin blocking on interior wood finishing
Painting around glass in doors and windows	Masking Liquid H2O	Peel-off film instead of taping every pane

Prep: clean off dirt and grease, scrape loose paint and lightly sand glossy areas before priming. Spot-prime stains first, and test heavy stains on a small area.

Not sure which primer your surface needs? Contact us and we'll help you choose.

ZINSSER Bulls Eye 1-2-3® Imprimador a Base de Agua

Características

Customer Reviews