Home » Fuji Spray Systems

Fuji Spray Systems

Shop Fuji Spray HVLP turbine systems, spray guns, cups, air caps, hoses, filters and parts. Fuji HVLP is made for cabinets, furniture, trim and other fine finish work. Pick a system by how you work, then add the cups, filters and cleaning supplies that go with it.

Which Fuji spray system is right for you?

Your project/need Best choice Why
Hobby projects and occasional use, on a budget Semi-PRO 2 or Hobby-PRO 2 Fuji's entry-level DIY-PRO line: 2-stage, about 5 psi, 12.35 lb, with an M-Model gun
Portable system for job sites and small shops Mini-Mite 5 PLATINUM, Mini-Mite 4 or Mini-Mite 3 Lightweight at 14.56 to 15.22 lb. The 5-stage Mini-Mite 5 has the most pressure (9.5 psi)
Shop use, quiet running and a bigger turbine Q5 PLATINUM, Q4 or Q3 3 to 5 stages, 6.5 to 9.5 psi, 61 to 63 dBA at 15 ft
Thicker coatings with the most control D6 6-Stage 6 stages, up to 11.5 psi, Smart Select panel and a 75 ft Easy Pause remote
A lower price on a Platinum system Mini-Mite 5 or Q5 refurbished Refurbished Fuji systems. Check each product page for what is included
A different gun or cup for your turbine HVLP Paint Guns, such as the T75G gravity feed T70 (1 qt bottom feed), T75G (600 cc gravity) and G-XPC (400 cc, swivel cup)
Spraying with a pressure pot 2.5 gallon Pressure Pot 5470 Holds more coating for long runs and bigger jobs
Air cap sizes for different coatings 5100 Series (T-Series) or 7020 Series (M-Series) Match the cap size to the coating thickness
Filters for your turbine 5029 (Q3, Q4, Q5) or 7224-2 (Mini-Mite PLATINUM) Clean filters protect the turbine motor
Hoses and fittings Hi-Flex 25 ft hose or Flexible Whip Hose Replacement turbine hose and a 6 ft whip hose for the gun

Prep/accessories: keep a cleaning kit, cone strainers and a wet film gauge on hand.

Not sure which Fuji system or part you need? Contact us with your model and we'll help you choose.

114 Products

Fuji Spray Systems FAQ

1Which Fuji turbine system should I buy?

For hobby and weekend projects, the Semi-PRO 2 or Hobby-PRO 2. For a portable pro system, the Mini-Mite 5. For shop use, the Q5. For thick coatings and the most control, the D6.

2What do the stages and psi numbers mean?

More stages build more pressure and airflow, so thicker coatings atomize with less thinning. Fuji lists the Q3 and Mini-Mite 3 at 6.5 psi, the Q4 and Mini-Mite 4 at 9 psi, the Q5 and Mini-Mite 5 at 9.5 psi, and the D6 at up to 11.5 psi.

3Q series or Mini-Mite: what is the difference?

Each Mini-Mite matches its Q model in stages and pressure. The Mini-Mite is lighter, 14.56 to 15.22 lb, and built to carry from job to job. The Q series weighs 22.29 to 24.06 lb and Fuji lists it at 61 to 63 dBA at 15 ft.

4Which gun should I choose: T70, T75G or G-XPC?

The T70 has a 1 quart (1000 cc) bottom feed cup for bigger jobs. The T75G has a 600 cc gravity cup and suits most cabinet and furniture work. The G-XPC has a 400 cc cup that tilts, for tight spots and small parts.

5Can a Fuji spray latex paint and other coatings?

Yes. Fuji systems spray waterborne and solvent-based coatings, including stains, lacquers, enamels and urethanes. Check viscosity with a Ford cup, thin only as the coating maker directs, and test on scrap first.

6What warranty does Fuji give?

Fuji lists 24 months on parts and labour for its Platinum and DIY-PRO systems, and 2 + 1 years for the D6. Coverage can differ by product, so check the product page or contact us.

7Is Fuji good for cabinets and furniture?

Yes. Fuji HVLP systems are made for fine finishing on cabinets, doors, furniture and trim. For large walls or whole-house repaints, an airless sprayer is much faster.