The Graco Ultra QuickShot II is designed to be more serviceable than the original QuickShot, with a replaceable ProConnect pump, serviceable check valves, replaceable gun cartridge and upgraded filtration system.
Whether you're looking for a replacement pump, filters, spray tips, cup components or repair parts, this guide covers the key Graco QuickShot II parts and accessories, including genuine Graco part numbers and what each component is used for.
Graco model 26E006 Ultra QuickShot II operates at up to 2,000 PSI and uses RAC X FFLP SwitchTips from 0.008 to 0.016 inches. Graco specifically designed several of its major components for field service, allowing contractors to replace common wear parts without replacing the complete sprayer.
Graco QuickShot II Parts List
| QuickShot II Part | Part Number | Purpose |
|---|---|---|
| ProConnect Pump Assembly | 2014406 | Complete QuickShot II replacement pump |
| Replacement Applicator | 2014779 | Complete QuickShot II gun/applicator assembly |
| Cup Filter, 3-Pack | 18H073 | Filters coating entering the sprayer |
| Check Valve Repair Kit | 2014548 | Services the pump outlet/check valve system |
| Control & Enclosure Kit | 2014547 | QuickShot II control/electronics assembly |
| Cup & Lid Kit | 18H079 | 32 oz cup, lid, plug and O-ring assembly |
| Storage Plug Kit | 18H080 | Three replacement cup storage plugs |
| Ground Kit | 18H085 | Replacement grounding components |
| Belt & Holster Kit | 18H086 | Replacement carrying belt and holster |
| Solvent Gasket Kit | 18H126 | Solvent gasket and removal tool |
| Prime Valve & Knob Kit | 2000079 | Replacement prime valve and knob |
| Replacement Hose | 2014917 | QuickShot II replacement hose |
| Easy Out Pump Filter Kit | 2014138 | Replacement pump filters |
| ProConnect Gun Cartridge | 2005788 | Service cartridge for the QuickShot II gun |
| RAC X FFLP SwitchTips | FFLPxxx | Fine-finish spray tips |
| RAC X FFLP Tip Guard | 246215 | Spray tip guard |
| FFLP Tip Seal & Seat | 17P501 | Replacement tip seal and seat |
*These part numbers come directly from Graco's current QuickShot II replacement-parts list.
Graco QuickShot II Parts Diagram
Not sure which QuickShot II component you need? Graco's official QuickShot II repair manual includes exploded parts diagrams for the sprayer, pump and applicator. Use the diagrams to identify the component and confirm the Graco part number before ordering.
View the Graco QuickShot II Parts & Repair Manual
Graco QuickShot II ProConnect Pump – 2014406
The Graco 2014406 QuickShot II ProConnect Pump is the complete replacement pump assembly for the QuickShot II.
One of the significant upgrades Graco made to the second-generation QuickShot is a more serviceable pump design. Graco describes it as a longer-life ProConnect pump with full-metal EasyAccess check valves that can be repaired in the field.
The 2014406 assembly includes components associated with the outlet valve and prime valve system.
Part Number: 2014406
Fits: Graco QuickShot II
Important: This pump is not interchangeable with the pump from the original QuickShot.
Shop the Graco QuickShot II ProConnect Pump, 2014406
Graco QuickShot II Check Valve Repair Kit – 2014548
The 2014548 Check Valve Repair Kit allows contractors to service the QuickShot II pump without replacing the complete pump assembly.
Graco specifically identifies this as one of the QuickShot II's field-serviceable components. The kit includes outlet components, O-rings and the filter housing components specified in the QuickShot II parts diagram.
Part Number: 2014548
Fits: Graco QuickShot II
Shop the Graco QuickShot II Check Valve Repair Kit, 2014548
Graco QuickShot II PowerShot ProConnect Cartridge – 2005788
The QuickShot II uses a redesigned instant-response spray gun with a replaceable PowerShot ProConnect Cartridge.
Instead of replacing the entire applicator when the cartridge reaches the end of its service life, the 2005788 replacement cartridge can be replaced independently. Graco also uses this cartridge in its Contractor PowerShot gun.
Part Number: 2005788
Fits: Graco QuickShot II and compatible Contractor PowerShot guns
Shop the Graco QuickShot II PowerShot ProConnect Cartridge, 2005788
Graco QuickShot II Easy Out Pump Filters – 2014138
One of the important differences between the original QuickShot and QuickShot II is the Easy Out professional-grade filtration system.
The QuickShot II adds pump filtration in addition to the cup strainer. Graco says this additional filtration is designed to reduce clogging.
Replacement pump filters are sold under part number 2014138, with Graco specifying a replacement kit containing 60- and 100-mesh filters.
Part Number: 2014138
Fits: Graco QuickShot II
Shop Graco QuickShot II Easy Out Filters, 2014138
Graco QuickShot II Cup Filters – 18H073
The Graco 18H073 filter kit provides replacement filtration at the QuickShot cup.
Unlike several major mechanical components that changed with the second-generation machine, 18H073 carries over to the QuickShot II. Graco lists it directly in the QuickShot II replacement-parts diagram and also identifies 18H073 as the replacement EasyFill cup strainer on its QuickShot II support page.
Part Number: 18H073
Fits: Original Graco QuickShot and QuickShot II
Shop Graco QuickShot & QuickShot II Filters, 18H073
Graco QuickShot II Cup & Lid Kit – 18H079
The 18H079 Cup & Lid Kit is another component shared between the original QuickShot and QuickShot II.
Graco's QuickShot II parts diagram identifies the 18H079 kit as including the 32 oz cup, lid, plug, O-ring and label, along with associated filter and plug components.
This is the appropriate replacement when more than just the storage plug needs to be replaced.
Part Number: 18H079
Fits: Original Graco QuickShot and QuickShot II
Shop Graco QuickShot & QuickShot II Cup & Lid Kit, 18H079
Graco QuickShot II Storage Plugs – 18H080
Lost or damaged the plug used with the QuickShot cup?
The Graco 18H080 kit contains three replacement QuickShot plugs and is explicitly listed in the QuickShot II replacement-parts diagram.
Part Number: 18H080
Quantity: 3
Fits: Original Graco QuickShot and QuickShot II
Shop Graco QuickShot Storage Plugs, 18H080
Graco QuickShot II Replacement Hose – 2014917
The Graco 2014917 Hose Kit is the replacement hose specified for the QuickShot II.
This is important because the original QuickShot hose and QuickShot II applicator system should not be assumed interchangeable. Graco explicitly states that the QuickShot II gun/hose applicator and ProConnect pump are designed for the QuickShot II and are not interchangeable with the original QuickShot system.
Part Number: 2014917
Fits: Graco QuickShot II
Shop the Graco QuickShot II Replacement Hose, 2014917
Graco QuickShot II Replacement Applicator – 2014779
For replacement of the complete QuickShot II spray applicator assembly, Graco specifies 2014779.
Graco makes an especially important compatibility note in its manual: 2014779 is designed for the QuickShot II only.
The complete applicator kit incorporates the hose and replaceable cartridge components specified in the QuickShot II parts diagram.
Part Number: 2014779
Fits: Graco QuickShot II only
Original QuickShot Replacement Spray Gun – 18H059
If you own the original Graco Ultra QuickShot, the replacement spray gun is Graco part 18H059.
The 18H059 is designed for the first-generation QuickShot and should not be confused with the 2014779 applicator used by the QuickShot II. The original QuickShot gun and redesigned QuickShot II gun/hose applicator are not interchangeable.
Part Number: 18H059
Fits: Original Graco Ultra QuickShot
Does Not Fit: Graco Ultra QuickShot II
Shop the Graco QuickShot Replacement Spray Gun, 18H059
Graco RAC X FFLP Spray Tips for the QuickShot II
The QuickShot II uses Graco RAC X Fine Finish Low Pressure (FFLP) SwitchTips.
According to Graco, the QuickShot II is designed for FFLP tip sizes ranging from 0.008 to 0.016 inches. The sprayer includes FFLP210 and FFLP514 tips, and both are specifically identified in its replacement-parts list.
This makes additional FFLP sizes one of the most useful QuickShot II accessories for contractors who spray different coatings and surfaces.
Shop Graco RAC X FFLP Spray Tips
Graco RAC X FFLP Tip Guard – 246215
The Graco 246215 RAC X HandTite Tip Guard is the spray tip guard specified in the QuickShot II parts diagram.
It accepts the RAC X FFLP SwitchTips used by the QuickShot II and can also be used across other compatible Graco RAC X spray systems.
Part Number: 246215
Shop the Graco RAC X HandTite Tip Guard, 246215
Graco FFLP OneSeal Tip Seal & Seat – 17P501
The small seal behind the FFLP SwitchTip is easy to overlook until it becomes damaged or goes missing.
Graco specifies 17P501 as the tip seal and seat in the QuickShot II replacement-parts list.
Keeping spare seals with your FFLP tips can be worthwhile for contractors who regularly use their QuickShot II.
Part Number: 17P501
Shop Graco RAC X FFLP OneSeal Gaskets, 17P501
Other Graco QuickShot II Replacement Parts
There are several additional service components worth knowing about even if they aren't parts most contractors will replace frequently.
The QuickShot II parts list includes the 18H085 grounding kit, 18H086 belt and holster kit, 18H126 solvent gasket kit, 2000079 prime valve and knob kit, and 2014547 control and enclosure kit.
For contractors spraying oil-based or flammable coatings, grounding is particularly important. Graco requires the grounding wire and plug to be connected to a true earth ground when using these types of materials.
Original QuickShot vs QuickShot II Replacement Parts
This is an important distinction when shopping for parts.
Although several accessories carry over from the original QuickShot, many of the major repair components do not.
For example, the QuickShot II uses a new ProConnect pump and redesigned gun/hose applicator. Graco specifically states that the new gun and pump cannot be interchanged with those from the original QuickShot.
| Component | Original QuickShot | QuickShot II |
|---|---|---|
| Pump | 18H072 | 2014406 |
| Outlet/Check Valve | 18H075 | 2014548 |
| Control/Enclosure | 18H076 | 2014547 |
| Hose | 2000354 | 2014917 |
| Applicator/Gun | 18H059 | 2014779 |
| Cup Filter | 18H073 | 18H073 |
| Cup & Lid Kit | 18H079 | 18H079 |
| Storage Plug Kit | 18H080 | 18H080 |
| Prime Valve & Knob | 2000079 | 2000079 |
| Ground Kit | 18H085 | 18H085 |
| Solvent Gasket Kit | 18H126 | 18H126 |
| RAC X FFLP Guard | 246215 | 246215 |
| FFLP Seal & Seat | 17P501 | 17P501 |
Important: Always verify the exact Graco part number before ordering a replacement component. Parts that look similar between the original QuickShot and QuickShot II are not necessarily interchangeable.
Which QuickShot II Spare Parts Should Contractors Keep on Hand?
You don't necessarily need to keep every repair component in your truck.
For contractors who regularly use the QuickShot II, I'd prioritize the smaller wear and maintenance components:
- 18H073 cup filters
- 2014138 Easy Out pump filters
- RAC X FFLP spray tips
- 17P501 FFLP seals
- 18H080 storage plugs
For higher-volume professional use, keeping a 2005788 ProConnect gun cartridge available can also reduce downtime if the cartridge reaches the end of its service life.
The larger pump, applicator, hose and electronic assemblies make more sense as replacement components when they're actually required.
Find the Right Graco QuickShot II Part
The QuickShot II was designed with serviceability in mind, but selecting the correct replacement part is important because not every component from the original QuickShot fits the second-generation sprayer.
For the easiest parts identification, use the part number printed in Graco's QuickShot II parts diagram rather than relying only on the appearance or description of the component.
Shop Graco QuickShot II Parts & Accessories
Shop the Graco Ultra QuickShot II Cordless Airless Paint Sprayer
Read our Graco QuickShot II Review
Graco QuickShot II Parts FAQs
What replacement pump does the Graco QuickShot II use?
The Graco QuickShot II uses the 2014406 ProConnect replacement pump assembly. The QuickShot II pump is not interchangeable with the pump from the original QuickShot.
What filters does the Graco QuickShot II use?
The QuickShot II uses 18H073 cup filters along with the newer 2014138 Easy Out pump filter kit. Graco says the 2014138 replacement kit includes 60- and 100-mesh pump filters.
What spray tips fit the Graco QuickShot II?
The QuickShot II uses Graco RAC X FFLP SwitchTips only, with supported orifice sizes from 0.008 through 0.016 inches.
Does the original Graco QuickShot use the same parts as the QuickShot II?
Some parts are shared, including the 18H073 filter kit, 18H079 cup kit, 18H080 plug kit and several accessories. However, major components including the pump and gun/hose applicator changed. Graco states that the QuickShot II pump and gun/hose system are not interchangeable with the original QuickShot.
What replacement cartridge does the QuickShot II gun use?
The QuickShot II gun uses the Graco 2005788 PowerShot ProConnect replacement cartridge. The same replacement cartridge is also designed for compatible Graco Contractor PowerShot guns.
What is the Graco QuickShot II model number?
The North American Ultra QuickShot II is model 26E006. Graco lists the North American version with a 120 V charger and RAC X FFLP tip compatibility.