The best outdoor cleaner for just about everything, this unique formula uses Super Hydrogen Power to tackle just about any cleaning job around your home. Mix these concentrated granules in varying strengths to effectively remove grease, grime, dirt, organic stains, tree sap and mineral deposits. Kills mold and mildew. For use on wood, masonry, concrete, fiber cement, fiberglass, outdoor furniture, cushions and floor coverings, glass, and tile.
- Restores wood to mill bright appearance
- Cleans and rejuvenates wood
- Easy to apply
- Biodegradable: safe on soil and plant life
Average gallon coverage: About 300-400 square feet depending on surface type. This container will make roughly 16 gallons of cleaner.
Sweep the surface with a stiff broom or use a blower to clean area of debris. If the surface has been treated with a coating, use Penofin Pro-Tech Stripper (Step #1) to prepare the area. Penofin Pro-Tech cleaner is most effective at temperatures where wood is not hot to the touch. Protect bordering metal surfaces when using at high concentrations. Dampen surrounding vegetation with water.
Pour one to two cups of Penofin Pro-Tech Cleaner's hydrogenated crystals into one gallon of clean water and mix. Mist the surface with a garden hose and sprayer. Using a pump up garden sprayer, brush or mop, apply the solution liberally. For best results DO NOT ALLOW THE SOLUTION TO DRY ON THE SURFACE. Mist occasionally and agitate with a broom or nonmetallic stiff bristled brush for ten to fifteen minutes. Rinse thoroughly with water.
For mildew removal, driveways, garage floors, and really big messes: Wet the surface to be cleaned and sprinkle directly with Penofin Pro-Tech. Agitate the area with a broom or stiff bristle brush for at least 15 minutes. Rinse thoroughly.
For wood surfaces:
Follow the application with Penofin Pro-Tech Brightener (Step#3), to remove any tannin stains, and to return the wood to its proper Ph before staining with Penofin. For general cleaning and maintenance (barbecues, outdoor furniture, and swing sets.): Remove any loose debris. Mix 1/2 to 1 cup per gallon of water. Scrub with a stiff-bristled nonmetallic brush and rinse well. Do not let this product stand on metallic surfaces as it may pit or etch.
ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION AND SOLID SHOES WHEN APPLYING. TEST ON A SMALL AREA TO ENSURE THE DESIRED RESULTS ARE ACHIEVED. SURFACE WILL BE SLIPPERY. DO NOT INHALE POWDER AS THIS PRODUCT WILL IRRITATE MUCUS MEMBRANES, MAKE YOUR NOSE RUN AND YOUR EYES WATER.