Modèle Fuji Mini-Mite 5 PLATINUM, Système de pulvérisation de peinture HVLP - Rénové
Impossible de charger la disponibilité du service de retrait
Fuji Mini-Mite 5 PLATINUM HVLP Paint Spray System, Refurbished
This is a refurbished Fuji Mini-Mite 5 PLATINUM, a lightweight 5-stage turbine HVLP system. The Mini-Mite 5 makes about 9.5 psi, so thicker coatings need little thinning, and it weighs about 15 lb. Choose a T70, T75G or G-XPC non-bleed gun at checkout.
Key Features
- 5-stage turbine, about 9.5 psi for heavier coatings and thicker viscosity finishes.
- Light and portable: 15.22 lb turbine.
- Heat Dissipation Chamber and Noise Reduction Covers on the turbine.
- Side-mounted fan pattern control on the gun.
- 25 ft hose with quick-connect coupling and air control valve on a new Mini-Mite 5.
Who It's For / What to Spray
The Mini-Mite 5 suits cabinet makers, woodworkers, furniture refinishers and serious DIYers who move their sprayer often. Use it for cabinets, doors, furniture, trim and millwork with lacquers, enamels, varnishes and other coatings.
Not ideal for large exterior walls or whole-house repaints. An airless sprayer covers big surfaces much faster.
Gun Options
- T70 Bottom Feed, 1.3 mm: 1 qt (1000 cc) cup. Best for bigger jobs and fewer refills.
- T75G Gravity Feed, 1.3 mm: 600 cc nylon cup. A good all-round choice for cabinets and furniture.
- GXPC Side Mount Gravity Feed, 1.4 mm: 400 cc cup. Suits tight spots and small parts.
What's in the Box
- Fuji Mini-Mite 5 PLATINUM turbine, refurbished
- Brand new hose
- Brand new spray gun of your choice: T70, T75G or GXPC (the variant you pick)
The turbine is refurbished. The gun and hose are brand new, and the system comes with a 2-year manufacturer's warranty.
Refurbished or New?
The new Mini-Mite 5 PLATINUM is the same model sold new. The refurbished Mini-Mite 4 PLATINUM is a 4-stage, 9 psi turbine. Pick the Mini-Mite 5 for a bit more pressure in the same light body.
Specs
| Motor | 5-stage turbine, about 9.5 psi |
| Cup (by gun) | T70: 1 qt (1000 cc). T75G: 600 cc nylon. GXPC: 400 cc |
| Air cap | 1.3 mm (T70, T75G). 1.4 mm (GXPC) |
| Hose (new unit) | 25 ft (7.6 m) |
| Turbine weight | 15.22 lb |
| Filter | #7224-2 (dual) |
| Warranty | 2-year manufacturer's warranty |
| Condition | Refurbished turbine. New gun and hose |
Setup & Use
- Set up the turbine on a flat, clean surface away from overspray, with the filters in place.
- Connect the hose to the turbine with the quick-connect and attach it to the gun.
- Strain the coating, fill the cup and check its viscosity with a #4 Ford cup. Thin only as the coating maker directs.
- Test on cardboard. Adjust the fan pattern, the fluid flow and the air control valve until the spray is even.
- Spray with the gun square to the surface, overlapping each pass by about half.
- Clean right away. Empty the cup, run the correct cleaner through the gun, and brush the air cap and nozzle clean.
- Check the turbine filters often and replace them when dirty.
FAQ
1Is this unit new or used?
The turbine is refurbished. The spray gun and hose are brand new. Contact us if you have questions about a unit.
2What warranty does a refurbished unit have?
It comes with a 2-year manufacturer's warranty.
3Which gun should I choose?
T70 for the large 1 qt cup. T75G for most cabinet and furniture work. GXPC for tight spaces and small parts.
4Mini-Mite 5 vs Mini-Mite 4?
The Mini-Mite 5 has 5 stages and about 9.5 psi. The Mini-Mite 4 has 4 stages and 9 psi.
5Can it spray latex paint? Do I need to thin?
Fuji says the 5-stage turbine suits heavier coatings and thicker viscosity finishes. Follow the coating maker's directions, and check viscosity with a #4 Ford cup.
6Is it good for cabinets and furniture finishes?
Yes. Fine atomization suits cabinets, doors, furniture and trim. Test your coating on scrap first.
7What filter does it use?
It uses #7224-2 filters, sold separately.
8Can I get a different air cap size?
Yes. Fuji's T-Model guns take air caps from 0.8 to 2.5 mm. We stock the 5100 series air cap sets.
- Found a lower price elsewhere? We'll match it plus give you an extra 5% off the difference. Get the best deal guaranteed*
Canada Shipping
- Enjoy free shipping to Ontario and Quebec on orders over $249.
- Orders over $249 qualify for free shipping to all other provinces.
- Returns accepted within 35 days from the date of delivery.
- Custom tinted paints are classified as Final Sale items and are not eligible for return or store credit.