Multi Surface Waterproofer for Stucco, Brick, Masonry, Wood, Concrete, Clear

Protect Your Stucco, Brick, Masonry, Wood, and Concrete with Insl-X Multi Surface Waterproofer.

Insl-x Multi-Surface Waterproofer is a penetrating, siloxane-based water repellent. Once fully absorbed and dry, this clear waterproofer will seal and protect the surface without changing its visual appearance or texture.

Features

• Protects and seals
• Dries clear with no visible change to the substrate
  
• Penetrating siloxane based formula
  
• Easy soap & water clean-up 

Recommended For

Use on interior or exterior properly prepared new or reconditioned concrete, brick, wood, stucco and masonry substrates. 

Limitations

• Apply when surface and ambient temperature is above 40 °F and below 90 °F
  
• Not for immersion service or areas of pooling water

Coverage

Spread rate will vary depending on substrate and porosity. Use the table below as a guide:

Maintenance

Surfaces should be checked each year to ensure integrity of the coating. Perform a splash test on the surface and if water absorbs quickly, apply an additional coat of the product.