Benjamin Moore Regal Select Interior Paint and Primer
Couldn't load pickup availability
Benjamin Moore Regal Select Interior Paint & Primer
Regal Select is Benjamin Moore's premium 100% acrylic interior paint and primer, the go-to for durability and washability. Its stain release technology lets everyday marks wash off with soap and water, and it flows out smooth with excellent hide. Choose from Ulti-Matte, Eggshell, Pearl or Semi-Gloss.
Key Features
- Paint and primer in one: self-priming on drywall, plaster, smooth concrete and most wood.
- Stain release: household stains wash off with soap and water.
- Scrubbable and mildew resistant for kitchens, bathrooms and high-traffic rooms.
- Excellent flow, levelling and hide.
- Low VOC and Green Promise designated.
- Gennex colour technology for rich, lasting colour.
Where to Use It
Interior walls, ceilings, trim, doors and cabinets over drywall, plaster, masonry, wood and primed metal: living rooms, bedrooms, kitchens, bathrooms, hallways and basements. Not for exterior use or floors. Don't paint below 10 °C.
Finishes and Sizes
- Ulti-Matte: the flattest finish, for walls and ceilings.
- Eggshell: a soft low sheen, the most popular for walls.
- Pearl: a satin sheen for kitchens, bathrooms and kids' rooms.
- Semi-Gloss: for trim, doors and cabinets.
946 mL (about 100 sq ft) and 3.79 L (400–450 sq ft). Tinted to any Benjamin Moore colour, and we can match colours from other brands too. Enter the colour number and name when you order.
Regal Select, ben or Aura?
ben is Benjamin Moore's value paint and primer. Regal Select steps up in washability and stain release. Aura is the top of the line, with Color Lock technology for the richest, longest-lasting colour. For heavy scuffing in commercial spaces, see Ultra Spec Scuff-X.
Specs & Coverage
- 3.79 L: 400–450 sq ft (37.1–41.8 m²) per coat
- 946 mL: about 100 sq ft per coat
| Type | 100% acrylic paint and primer |
| Sheen | Ulti-Matte 3–5 @ 85°. Eggshell 15–22 @ 85°. Pearl 20–30 @ 60°. Semi-Gloss 50–60 @ 60° |
| VOC | Under 50 g/L (Semi-Gloss under 100 g/L) |
| Dry time (25 °C, 50% RH) | Touch: 1 hour. Recoat: 1–2 hours (Semi-Gloss 3 hours) |
| Washable | After 2 weeks |
| Application temperature | 10–32 °C (50–90 °F) |
| Application | Nylon/polyester brush, premium roller, airless spray (1,500–2,500 psi, 0.011–0.015 tip) |
| Clean-up | Warm soapy water |
| Certifications | Green Promise, CDPH emissions certified, Green Seal GS-11, MPI |
Application Guide
- Prep. Clean off dirt, grease and dust. Scrape loose paint, fill holes, sand glossy surfaces dull and dust off.
- Prime only where needed. Drywall, plaster and smooth concrete need no primer. Use Fresh Start High-Hiding All Purpose Primer on bleeding woods like cedar, a block filler on rough masonry and a metal primer on bare metal.
- Stir well. Thinning isn't needed.
- Cut in, then roll with a premium roller, keeping a wet edge.
- Second coat after 1–2 hours (3 hours for Semi-Gloss).
- Wait 2 weeks before washing the walls.
FAQ
1How much paint do I need?
Each 3.79 L covers 400–450 sq ft per coat. A 12 × 12 ft bedroom with 8 ft ceilings has about 380 sq ft of wall, so two coats take about 2 gallons. Add a 946 mL for touch-ups or a small accent wall.
2Which finish should I choose?
Ulti-Matte for ceilings and low-traffic walls, Eggshell for most living spaces, Pearl for kitchens, bathrooms and kids' rooms, and Semi-Gloss for trim, doors and cabinets.
3Do I need a primer?
Usually not. It's self-priming on drywall, plaster, smooth concrete and most wood. Prime bleeding woods, rough masonry and bare metal first.
4Is Regal Select good for bathrooms?
Yes. It's mildew resistant and scrubbable. Use Pearl or Semi-Gloss in bathrooms and run the fan.
5When can I wash the walls?
It's dry to touch in an hour, but give it 2 weeks to fully cure before scrubbing.
6How does Regal Select compare to Aura and ben?
ben is the value option. Regal Select adds stain release and better washability. Aura is Benjamin Moore's top line, with Color Lock technology for the richest colour.
7Can I spray it?
Yes. Use an airless sprayer at 1,500–2,500 psi with a 0.011–0.015 tip, and give spray equipment a final mineral spirits rinse to prevent rust.
- Found a lower price elsewhere? We'll match it plus give you an extra 5% off the difference. Get the best deal guaranteed*
Canada Shipping
- Enjoy free shipping to Ontario and Quebec on orders over $249.
- Orders over $249 qualify for free shipping to all other provinces.
- Returns accepted within 35 days from the date of delivery.
- Custom tinted paints are classified as Final Sale items and are not eligible for return or store credit.